*******
* Spice Model
* Item: CMPDM302PH
* Date: 06/07/12
* Revision History: A
* ==========================================================
* This model was developed by: 
* Central Semiconductor Corp.
* 145 Adams Avenue
* Hauppauge, NY 11788
*
* These models are subject to change without notice.
* Users may not directly or indirectly re-sell or 
* re-distribute this model. This model may not 
* be modified, or altered without the consent of Central Semiconductor Corp. 
*
* For more information on this model contact
* Central Semiconductor Corp. at:
* (631) 435-1110 or Engineering@centralsemi.com
* http://www.centralsemi.com
* ==========================================================
*******
*SRC=CMPDM302PH;CMPDM302PH;MOSFETs P;Enh;30.0V 2.4A 0.061ohms Central Semi Central Semi
*SYM=POWMOSP
.SUBCKT CMPDM302PH 1 2 3
* *************************************
* Model Generated by MODPEX *
* Copyright(c) Symmetry Design Systems*
* All Rights Reserved *
* UNPUBLISHED LICENSED SOFTWARE *
* Contains Proprietary Information *
* Which is The Property of *
* SYMMETRY OR ITS LICENSORS *
* modeling services provided by *
* Interface Technologies www.i-t.com *
* *************************************
* Model generated on Jun 7, 2012
* MODEL FORMAT: SPICE3
* Symmetry POWER MOS Model (Version 1.0)
* External Node Designations
* Node 1 -> Drain
* Node 2 -> Gate
* Node 3 -> Source
M1 9 7 8 8 MM L=100u W=100u
* Default values used in MM:
* The voltage-dependent capacitances are
* not included. Other default values are:
* RS=0 RD=0 LD=0 CBD=0 CBS=0 CGBO=0
.MODEL MM PMOS LEVEL=1 IS=1e-32
+VTO=-1.35 LAMBDA=0 KP=52.25
+CGSO=3.57793e-06 CGDO=1e-11
RS 8 3 0.05
D1 1 3 MD
.MODEL MD D IS=4.09789e-10 RS=0.183204 N=1.5 BV=300
+IBV=10 EG=1 XTI=1 TT=2.45322e-05
+CJO=5.87036e-11 VJ=2.79813 M=0.3 FC=0.499298
RDS 3 1 1e+06
RD 9 1 0.00749345
RG 2 7 8.68323
D2 5 4 MD1
* Default values used in MD1:
* RS=0 EG=1.11 XTI=3.0 TT=0
* BV=infinite IBV=1mA
.MODEL MD1 D IS=1e-32 N=50
+CJO=1.62008e-10 VJ=3.05912 M=0.899995 FC=1e-08
D3 5 0 MD2
* Default values used in MD2:
* EG=1.11 XTI=3.0 TT=0 CJO=0
* BV=infinite IBV=1mA
.MODEL MD2 D IS=1e-10 N=0.4 RS=3e-06
RL 5 10 1
FI2 7 9 VFI2 -1
VFI2 4 0 0
EV16 10 0 9 7 1
CAP 11 10 8.48738e-10
FI1 7 9 VFI1 -1
VFI1 11 6 0
RCAP 6 10 1
D4 6 0 MD3
* Default values used in MD3:
* EG=1.11 XTI=3.0 TT=0 CJO=0
* RS=0 BV=infinite IBV=1mA
.MODEL MD3 D IS=1e-10 N=0.4
.ENDS 
******