******
* Spice Model
* Item: CMLDM5757
* Date: 10/18/22
* Revision History: B
* ==========================================================
* This model was developed by: 
* Central Semiconductor Corp.
* 145 Adams Avenue
* Hauppauge, NY 11788
*
* These models are subject to change without notice.
* Users may not directly or indirectly re-sell or 
* re-distribute this model. This model may not 
* be modified, or altered without the consent of Central Semiconductor Corp. 
*
* For more information on this model contact
* Central Semiconductor Corp. at:
* (631) 435-1110 or Engineering@centralsemi.com
* http://www.centralsemi.com
*
* NOTE: The CMLDM5757 is a dual MOSFET device.  This model is for a single MOSFET.
* You must place two copies of this model in your circuit for each CMLDM5757 device.
*
* ==========================================================
.SUBCKT cmldm5757 1 2 3
**************************************
*      Model Generated by MODPEX     *
*Copyright(c) Symmetry Design Systems*
*         All Rights Reserved        *
*    UNPUBLISHED LICENSED SOFTWARE   *
*   Contains Proprietary Information *
*      Which is The Property of      *
*     SYMMETRY OR ITS LICENSORS      *
*    modeling services provided by   *
* Interface Technologies www.i-t.com *
**************************************
* Model generated on Oct 16, 2022
* MODEL FORMAT: PSpice
* Symmetry POWER MOS Model (Version 1.0)
* External Node Designations
* Node 1 -> Drain
* Node 2 -> Gate
* Node 3 -> Source
M1 9 7 8 8 MM L=100u W=100u
* Default values used in MM:
* The voltage-dependent capacitances are
* not included. Other default values are:
*   RS=0 RD=0 LD=0 CBD=0 CBS=0 CGBO=0
.MODEL MM PMOS LEVEL=1 IS=1e-32
+VTO=-0.71786 LAMBDA=0.015622 KP=2.78479
+CGSO=9.44358e-07 CGDO=1.11878e-07
RS 8 3 0.0912681
D1 1 3 MD
.MODEL MD D IS=5e-09 RS=0.1 N=1 BV=20
+IBV=0.00025 EG=1.11 XTI=3 TT=7.86545e-05
+CJO=2.68943e-11 VJ=0.5 M=0.355239 FC=0.1
RDS 3 1 2e+07
RD 9 1 0.134705
RG 2 7 39.7125
D2 5 4 MD1
* Default values used in MD1:
*   RS=0 EG=1.11 XTI=3.0 TT=0
*   BV=infinite IBV=1mA
.MODEL MD1 D IS=1e-32 N=50
+CJO=8.52592e-11 VJ=1.01512 M=0.9 FC=1e-08
D3 5 0 MD2
* Default values used in MD2:
*   EG=1.11 XTI=3.0 TT=0 CJO=0
*   BV=infinite IBV=1mA
.MODEL MD2 D IS=1e-10 N=0.410233 RS=3e-06
RL 5 10 1
FI2 7 9 VFI2 -1
VFI2 4 0 0
EV16 10 0 9 7 1
CAP 11 10 8.52592e-11
FI1 7 9 VFI1 -1
VFI1 11 6 0
RCAP 6 10 1
D4 6 0 MD3
* Default values used in MD3:
*   EG=1.11 XTI=3.0 TT=0 CJO=0
*   RS=0 BV=infinite IBV=1mA
.MODEL MD3 D IS=1e-10 N=0.410233
.ENDS cmldm5757